Tinkercad

Tinkercad Units and Snap Grid Settings: Inches, Millimeters and Precision

How to switch Tinkercad between millimeters and inches, resize the workplane with Edit Grid, and set Snap Grid for precise dragging and nudging.

On this page
  1. The quick answer
  2. Changing units: millimeters or inches
  3. Changing the workplane size
  4. Snap Grid: how far shapes move
  5. How snap affects arrow keys
  6. Precision beyond the grid
  7. Units and exporting for printing

The quick answer

Two settings at the bottom right of the Tinkercad editor control units and precision:

  • Edit Grid: set units (millimeters or inches) and the workplane size.
  • Snap Grid: set how far shapes jump when you drag them or nudge them with the arrow keys.

Click Edit Grid, choose your units, and click Update Grid. Use the Snap Grid dropdown to pick a smaller step for finer control.

Changing units: millimeters or inches

  1. Click Edit Grid at the bottom right of the editor.
  2. Find the Units setting and choose Millimeters or Inches.
  3. Click Update Grid (or the equivalent confirm button).

Tinkercad uses millimeters by default, which matches how most 3D printers and slicers work.

What changes, and what doesn’t

  • Dimension readouts, Ruler values and typed sizes switch to the new unit.
  • Existing shapes keep their real size. A 25.4 mm cube becomes a 1 inch cube, not a 25.4 inch one.
  • Snap Grid options switch to inch-based fractions.

The unit setting applies to the current design, so new designs may start in millimeters again.

Changing the workplane size

The default workplane is 200 × 200 mm. In Edit Grid you can:

  • Pick a preset, which may include sizes matching common 3D printers
  • Enter a custom width and length

Setting the workplane to match your printer’s bed gives you a visual reminder of the build area. It doesn’t stop you from designing larger objects, though, and your slicer is the real check. The workplane size also doesn’t change any shapes.

Snap Grid: how far shapes move

Snap Grid sets the step size for:

  • Dragging shapes across the workplane
  • Nudging with the arrow keys
  • Resizing by dragging handles

With a 1 mm snap, shapes move and resize in 1 mm jumps. That makes it easy to land on whole numbers, but you can’t drag to 12.5 mm.

Choosing a snap value

The Snap Grid dropdown sits at the bottom right, next to Edit Grid. In millimeter mode it typically offers values such as 0.1, 0.25, 0.5, 1.0 (default), 2.0 and 5.0 mm, and an Off setting. Inch mode offers fractions of an inch. The exact options may vary between versions.

Guidance:

  • 1 mm suits general blocking out.
  • 0.5 or 0.25 mm suits fitting parts together and placing details.
  • 0.1 mm suits fine adjustment, such as clearance gaps.
  • Larger values (2–5 mm) suit quick layouts of big parts.

Turning snap off

Choosing Off lets shapes move freely. That’s useful for organic placement but makes it hard to hit exact values. For precise work, a small snap value plus typed numbers is usually better than snap off.

How snap affects arrow keys

  • Arrow keys nudge a selected shape by one snap step.
  • Shift + arrow nudges by ten steps.
  • Ctrl + Up/Down moves the shape vertically, also by snap steps.

So with a 0.5 mm snap, one arrow press moves 0.5 mm and Shift + arrow moves 5 mm. Change the snap setting to change your nudge distance. See Tinkercad keyboard shortcuts for the full list.

Precision beyond the grid

Snap Grid only affects dragging and nudging. You can always enter exact values directly:

Typed values aren’t limited to the snap step. You can type 12.35 mm even with a 1 mm snap.

Units and exporting for printing

STL files don’t store units, only numbers. Slicers almost always assume those numbers are millimeters. Tinkercad exports models in millimeters, so designs made in inch mode should still come out the correct physical size in most slicers. Check the dimensions in your slicer after importing anyway. If a part looks 25.4 times too small or too large, rescale it there. See how to turn Tinkercad into an STL file.

When importing files into Tinkercad, the import dialog lets you say which units the file was made in, which avoids the same problem in reverse; see importing images, PNG, STL and 3MF files into Tinkercad.

The complete guide to tinkercad

Tinkercad Tutorial: How to Design in 3D with Tinkercad
Read the guide

Keep exploring

Guides from other topics

All topics →