A name keychain is one of the best first Tinkercad projects. It takes a few minutes to design, prints quickly, and teaches text, holes and grouping. Here’s how to make one that looks good and doesn’t snap off your keys.
What you’ll need
- A free Tinkercad account (see our beginner’s Tinkercad tutorial if you’re new)
- A name or short word
- A 3D printer or print service, and a split ring or key ring
Dimensions below are example starting points.
Step 1: make the base
- Click Create new design (or open a blank design).
- Drag a Box onto the workplane.
- Size it about 60 mm long × 20 mm wide × 3 mm tall. Make it longer for longer names.
- Optional: in the inspector, increase the box’s Radius slightly to round the corners. Keep it small on a thin plate. See how to bevel and chamfer edges in Tinkercad.
A plate around 3 mm thick is sturdy for everyday use. Thinner plates flex and can break at the ring hole.
Step 2: add your name or text
- Drag the Text shape from Basic Shapes onto the workplane.
- Type your name into the text box in the inspector.
- Choose a bold, simple font. Thin or decorative fonts can lose detail when printed.
- Scale the text to fit the base, leaving room at one end for the ring hole. Hold Shift to keep proportions.
- Set the text height to about 1.5–2 mm.
- Lift the text so it sits on top of the base, then lower it slightly (about 0.2 mm) so it overlaps the base. That overlap ensures the letters fuse to the plate.
- Use Align (L) to center the text on the base’s width.
Letters roughly 6 mm tall or larger usually print legibly on a standard FDM printer. More text tips are in how to add and curve text in Tinkercad.
Step 3: add the key-ring hole
- Drag a Cylinder onto the workplane.
- Size it about 5 mm in diameter. Check that it fits the split ring you plan to use.
- Set it to Hole.
- Make it taller than the base so it cuts all the way through.
- Position it near one end of the base, leaving at least 2–3 mm of solid material between the hole and the edge. Less than that is the most common place for keychains to break.
For a stronger tab, add a separate rounded tab: a cylinder about 12 mm across at the end of the base, with the hole in its center.
Step 4: group and check
- Select everything (Ctrl + A).
- Group (Ctrl + G). The hole cuts through, and the text merges with the base.
- Orbit around the model and check that the text is attached, the hole goes all the way through, and nothing is floating.
- Click Export and choose .STL. See how to turn Tinkercad into an STL file.
If you want to keep separate colors in the editor, use the group’s Multicolor option. See grouping objects and using holes in Tinkercad.
Variations
Custom shapes and logos
- Use a Heart, Star or rounded shape instead of a box for the base.
- Import an SVG logo or drawing as the base or as a raised design. See importing images, PNG, STL and 3MF files into Tinkercad.
- Curve the name around a round tag with a curved text generator.
Engraved text
Instead of raised letters:
- Set the text to Hole.
- Sink it about 1 mm into a base that’s at least 3 mm thick.
- Group.
Engraved keychains are flat, so they slide in and out of pockets easily, and the letters can’t snag or break off.
Two-color keychains
Without a multi-material printer, you can still get two colors:
- Use a filament change at a layer height in your slicer. Many slicers offer a pause or color-change command at a chosen height.
- Set the change to happen right where the text begins (for example at 3 mm, the top of the base). The base prints in one color, and the raised letters print in another.
Printing tips
- Print flat, with the base on the build plate. No supports needed.
- Small parts can come loose from the bed. A brim can help if yours lifts at the corners.
- Use enough walls or perimeters so the area around the ring hole is solid.
- PLA is easy to print, but a tougher material such as PETG may last longer on keys that get knocked around.
Once you’ve made a keychain, try a custom cookie cutter or a box with a lid next.