Tinkercad

How to duplicate in Tinkercad?

Duplicate in Tinkercad with Ctrl+D, copy and paste, or Alt+drag, and use Duplicate and Repeat to build rows, circles and patterns in seconds.

On this page
  1. The quick answer
  2. Four ways to duplicate
  3. Using duplicate and repeat for patterns
  4. Copying shapes between designs
  5. Common problems

The quick answer

Select the shape and press Ctrl + D (Cmd + D on Mac), or click the Duplicate button in the toolbar. Tinkercad makes an exact copy in the same position, already selected, so you can drag it wherever you want.

Four ways to duplicate

Ctrl + D (Duplicate and Repeat)

Ctrl + D creates a copy directly on top of the original. Because the copy sits in exactly the same spot, it can look like nothing happened. Drag it or nudge it with the arrow keys to see both.

What makes Ctrl + D special is repeat: if you move, rotate or scale the copy and then press Ctrl + D again, Tinkercad makes another copy with the same change applied. That turns it into a quick pattern tool (more below).

Copy and paste

Ctrl + C copies the selection, and Ctrl + V pastes it. The pasted copy appears offset from the original rather than on top of it. Copy and paste doesn’t repeat transformations the way Ctrl + D does, but it’s handy for copying between designs.

Alt + drag

Hold Alt (Option on Mac) and drag a shape. You drag away a copy and leave the original where it was. It’s the most visual method, good for quick placement.

Toolbar button

The Duplicate icon in the top toolbar (next to copy and paste) does the same as Ctrl + D, for anyone who prefers clicking.

Using duplicate and repeat for patterns

Rows of evenly spaced copies

  1. Select a shape and press Ctrl + D.
  2. Move the copy a set distance, for example 10 mm to the right with the arrow keys. Each press moves by the snap-grid step, and Shift + arrow moves 10×.
  3. Press Ctrl + D again, as many times as you need. Each new copy appears another 10 mm along.

This is ideal for rows of holes, fence posts, keyboard-style buttons or stair steps (move each copy up and forward).

Circular patterns

Tinkercad rotates a selection around the center of its bounding box. To make copies rotate around the center of a circle instead, that point has to be the bounding-box center:

  1. Place your shape at the edge of the circle.
  2. Duplicate it, mirror the copy, and move it to the exact opposite side of the circle. Group the pair. The group’s center is now the circle’s center.
  3. Press Ctrl + D, then rotate the copy by 360° divided by the total number of shapes you want (for example 30° for 12 shapes). Type the angle for accuracy; see how to rotate objects by exact angles in Tinkercad.
  4. Press Ctrl + D again until the circle is filled. Each step places two shapes, so for 12 shapes you need six pairs in total.
  5. Ungroup the pairs if you need to edit shapes individually.

This trick works best for even numbers. For odd counts or many copies, an array shape generator is usually faster. See Tinkercad shape generators.

Growing or shrinking copies

Scale the duplicate (for example to 90%) and move it, then repeat Ctrl + D. Each copy is smaller than the last, which is useful for spirals, stacked tiers or decorative effects.

Copying shapes between designs

  1. Select the shapes in the first design and press Ctrl + C.
  2. Open the second design in the same browser.
  3. Press Ctrl + V.

For parts you reuse often, it’s better to save them as a custom shape so they’re always in your shapes panel. See the section on saving custom shapes in Tinkercad shape generators.

To copy an entire design, use the Duplicate or Copy option for the design itself on your Tinkercad dashboard, which makes a separate copy of the whole project.

Common problems

  • “Nothing happened” after Ctrl + D: the copy is sitting exactly on top of the original. Move it.
  • Repeat didn’t follow my move: Ctrl + D repeats only the transformation done right after the previous duplicate. If you click elsewhere or edit another shape in between, the pattern resets.
  • Copies are slightly off: dragging is imprecise. Use arrow keys, typed values or the Ruler for exact distances; see how to measure a dimension in Tinkercad.

For the rest of Tinkercad’s hotkeys, see our Tinkercad keyboard shortcuts page.

The complete guide to tinkercad

Tinkercad Tutorial: How to Design in 3D with Tinkercad
Read the guide

Keep exploring

Guides from other topics

All topics →