Tinkercad

How to Align, Distribute and Scale Objects in Tinkercad

Use Tinkercad's Align tool, space objects evenly without a distribute button, and scale shapes precisely with handles, typed sizes and percentages.

On this page
  1. How to align objects with the Align tool
  2. How to distribute objects evenly
  3. How to scale objects
  4. Creating an offset (a uniform wall or gap)

Good Tinkercad designs depend on parts that line up and are the right size. This guide covers the Align tool, ways to space objects evenly (Tinkercad has no one-click distribute), and every way to scale a shape precisely.

How to align objects with the Align tool

  1. Select two or more shapes (drag a box around them, or Shift + click).
  2. Press L or click the Align button in the toolbar.
  3. Small dots appear along each axis: three for left-right, three for front-back, and three for vertical. They represent minimum edge, center and maximum edge.
  4. Hover over a dot to preview the result, then click it to apply.

To center one shape on another, click the middle dot on both horizontal axes. To line up bottoms, click the lowest vertical dot.

Aligning to a reference object

By default, the selected shapes all move toward a shared position. To keep one shape still and move the others to it:

  1. Select all the shapes and press L.
  2. Click once on the shape you want to stay put. It becomes the reference (it highlights differently).
  3. Now click the alignment dots. Only the other shapes move.

This is the most reliable way to center a hole on a part without nudging the part itself.

Aligning to the workplane

The Align tool works between shapes, not to the workplane grid. To put something at an exact position on the grid, use the Ruler to type its coordinates. See how to measure a dimension in Tinkercad. To set a shape flat on the workplane, press D to drop it.

How to distribute objects evenly

Tinkercad doesn’t have a native “distribute evenly” command. These methods do the same job.

Duplicate and repeat

Tinkercad remembers the move you make right after duplicating:

  1. Select a shape and press Ctrl + D to duplicate it.
  2. Move the copy by an exact amount, for example 10 mm to the right using the arrow keys or the Ruler.
  3. Press Ctrl + D again. A new copy appears another 10 mm along.
  4. Keep pressing Ctrl + D for as many copies as you need.

This also works with rotation, which makes it useful for circular patterns. See how to duplicate in Tinkercad.

Calculating even spacing between two points

To fit a fixed number of items evenly into a fixed length, work out the center-to-center step:

step = (total length − item width) ÷ (number of items − 1)

Example: five 4 mm holes spread across a 60 mm span, measured from the outer edge of the first hole to the outer edge of the last. The step is (60 − 4) ÷ 4 = 14 mm. Place the first hole, duplicate, move it 14 mm, then repeat with Ctrl + D.

A spacer block also works: make a temporary box exactly the gap width, slide each item up against it, then delete the spacers.

Spacing in a circle

For holes or features around a circle:

  • Duplicate and rotate: if your shape’s rotation center is at the circle’s center (for example, group the shape with an invisible or temporary centered helper), duplicate, rotate by 360° ÷ number of copies, and repeat Ctrl + D. Typing the angle avoids rounding errors; see how to rotate objects by exact angles in Tinkercad.
  • Array shape generators: Tinkercad’s shape library has included circular and linear array generators. Search the shapes panel for “array.” See Tinkercad shape generators.

How to scale objects

Dragging handles

When you select a shape:

  • White corner handles change length and width.
  • Black side handles change one dimension at a time.
  • The top white handle changes height.

Uniform scaling

Uniform (proportional) scaling means changing every dimension by the same factor so the shape keeps its proportions. In Tinkercad:

  • Hold Shift while dragging a corner handle to scale uniformly.
  • Hold Shift + Alt (Shift + Option on Mac) to scale uniformly from the center, so the shape grows or shrinks in place.
  • Hold Alt alone to scale symmetrically from the center on the axis you’re dragging.

Typing exact sizes and percentages

Click any dimension value that appears while you drag, or click the dimension box when hovering over a handle, and type a number. Many versions also accept a percentage: type 50% to halve that dimension. Holding Shift while you confirm can apply it to all axes proportionally, though behavior may vary by version. Check the result.

Scaling groups and imported models

  • Scaling a group scales everything inside it, holes included.
  • Non-uniform scaling distorts rounded features. A box with a radius becomes oval-cornered if you stretch it in one direction. Set the radius on the final-size shape when you can.
  • Imported models are often the wrong size because of unit mismatches. A 25.4× too small or too large result usually means inches vs millimeters. See importing images, PNG, STL and 3MF files into Tinkercad.

Creating an offset (a uniform wall or gap)

Tinkercad has no offset or shell command, but you can calculate one. For a 2 mm wall around a 40 × 30 × 20 mm box:

  1. Duplicate the box.
  2. Resize the duplicate to 36 × 26 mm on the footprint (subtracting 2 mm from each side) and set it to Hole.
  3. Align it center-to-center with the original on both horizontal axes.
  4. Raise it 2 mm for the floor (and make it taller than the box if you want an open top).
  5. Group.

The same method works for clearance gaps: add instead of subtract. Our guide on how to hollow out an object in Tinkercad goes into hollowing curved and complex shapes.

The complete guide to tinkercad

Tinkercad Tutorial: How to Design in 3D with Tinkercad
Read the guide

Keep exploring

Guides from other topics

All topics →