Tinkercad

Using the Workplane Tool in Tinkercad to Build on Any Surface

Use Tinkercad's Workplane tool (W) to place a temporary grid on any face, add holes and text to sides and angled surfaces, then reset to the default.

On this page
  1. What the Workplane tool does
  2. How to place a workplane on a surface
  3. How to reset to the default workplane
  4. Practical uses
  5. The workplane and the Ruler
  6. Tips and common problems
  7. Workplane tool vs Edit Grid

By default, every shape you drag into Tinkercad lands on the blue grid at the bottom of the scene. The Workplane tool lets you move that grid onto any surface of any shape, including sides, tops and angled faces. New shapes then land flat on that surface, already aligned to it. It’s one of the most useful tools for adding details.

What the Workplane tool does

The workplane is the surface new shapes are placed on, and the reference the Ruler measures from. The Workplane tool temporarily moves it to a face you choose:

  • New shapes dropped into the scene sit flat on that face.
  • Shapes are oriented to match it, so on a 30° slope they’re tilted 30°.
  • Moving shapes with the mouse or arrow keys moves them along that plane.

Your existing shapes don’t change. Only the reference surface moves.

How to place a workplane on a surface

  1. Press W, or click the Workplane button in the top-right toolbar.
  2. Move your cursor over your model. A small orange preview grid follows the surface under the cursor.
  3. Click the face you want. The workplane jumps to it, shown as a temporary grid, usually orange.
  4. Drag new shapes from the shapes panel onto that face.

Tip: orbit the camera first so the face you want is clearly visible. Clicking at a shallow angle can select the wrong face.

How to reset to the default workplane

When you’re done:

  1. Press W (or click Workplane) again.
  2. Click on empty space anywhere off your model.

The workplane returns to its default position at the bottom of the scene. If it doesn’t reset, make sure you clicked empty background, not another shape.

Practical uses

Adding holes to the side of a shape

Say you need a screw hole through the side of a box:

  1. Press W and click the side face.
  2. Drag a Cylinder hole onto that face. It lands flat on the side, pointing straight into the box.
  3. Use the Ruler or arrow keys to position it, and make it long enough to pass through.
  4. Reset the workplane, then group the hole with the box.

This is much easier than dragging a cylinder onto the floor, rotating it 90° and lifting it into place.

Putting text or details on an angled face

On a sloped surface, such as the front of a desk sign:

  1. Press W and click the angled face.
  2. Drag in a Text shape. It sits flat on the slope, already tilted to match.
  3. Lower it slightly into the surface, or turn it into a hole to engrave. See how to add and curve text in Tinkercad.
  4. Reset the workplane and group.

Building on top of other shapes

Placing a workplane on the top face of a shape makes it easy to stack features, such as a knob on a lid or a chimney on a roof, without manually lifting each new part. It’s a common step in larger builds like those in our Tinkercad projects guide.

The workplane and the Ruler

The Ruler measures relative to the current workplane. Place a workplane on a face, then press R and click on that face to measure positions on it. This is the most precise way to place features on a side or angled face. See how to measure a dimension in Tinkercad.

Tips and common problems

  • Shapes land in the wrong orientation: the workplane was placed on a different face than intended. Reset and try again with a clearer view.
  • Shapes move strangely with the arrow keys: arrow-key nudges follow the current workplane. Reset it to get normal movement back.
  • Can’t find the grid: the temporary workplane may be hidden inside or behind another shape. Orbit around, or reset it.
  • Curved surfaces: on a sphere or cylinder, the workplane is placed tangent to the point you click, as a flat plane touching the curve. That’s useful for adding a single detail, but shapes won’t wrap around the curve.
  • The Drop shortcut (D): pressing D drops shapes toward the current workplane, which can be handy after placing a workplane on a top surface.

Workplane tool vs Edit Grid

The Workplane tool moves the build surface onto a shape’s face. Edit Grid, at the bottom right of the editor, changes the default workplane’s size and units. Snap Grid controls how far shapes move in each step. See Tinkercad units and snap grid settings for those.

For more time-savers, see our Tinkercad keyboard shortcuts.

The complete guide to tinkercad

Tinkercad Tutorial: How to Design in 3D with Tinkercad
Read the guide

Keep exploring

Guides from other topics

All topics →