The Basic Shapes panel only scratches the surface of what Tinkercad can make. Shape generators are configurable shapes, such as threads, arrays, gears and curved text, that you adjust with sliders instead of building by hand. Tinkercad also lets you draw your own profiles and save your own reusable shapes. This guide covers all three.
What is a shape generator?
A shape generator is a shape built from a small program with adjustable parameters. Drop one on the workplane and the inspector shows settings such as diameter, number of teeth, pitch or text. Change a value and the shape regenerates.
Unlike a basic box or cylinder, a generator can produce geometry that would be tedious to build by hand: a screw thread, a honeycomb pattern, or a ring of evenly spaced holes.
How to find shape generators
Tinkercad has reorganized its shapes panel several times, so the path varies by version. In general:
- Open the dropdown at the top of the shapes panel, which usually says Basic Shapes by default.
- Browse the other categories. Generator-type shapes have appeared under headings such as Shape Generators, Featured or All, or within themed categories.
- Use the search box in the shapes panel. Typing “thread,” “array,” “gear” or “text” is often the quickest route.
Tinkercad isn’t discontinued, and shape generators are still part of it, but individual generators come and go. If a tutorial mentions one you can’t find, search for similar terms or look for a newer equivalent.
Useful generators to know
Generators that have been popular over the years include:
- Threads: metric-style screw threads for bolts, nuts and caps
- Arrays: circular or linear patterns of a repeated shape
- Curved text: text that follows an arc (see how to add and curve text in Tinkercad)
- Gears: spur gears with adjustable tooth count
- Voronoi and patterns: organic, cell-like surfaces
- Extrusion and revolve-style shapes: custom profiles you shape with control points
Making threads in Tinkercad
Bolts and external threads
- Search the shapes panel for “thread” and drag a thread generator onto the workplane.
- In the inspector, set the diameter, pitch (distance between threads) and length or number of turns. The available parameters depend on the generator.
- Add a cylinder or hex head to make a bolt, overlap them slightly, and group.
Nuts and internal threads
- Duplicate the thread you made for the bolt.
- Set the duplicate to Hole.
- Center it in a solid cylinder or hexagonal prism with the Align tool, then group.
Clearance for 3D printing
A printed bolt and nut made from identical threads usually won’t screw together, because FDM prints come out slightly larger than designed on the outside and slightly smaller on the inside. You need clearance:
- Scale the internal (hole) thread up slightly, or the external thread down, so there’s a gap.
- A total diametric clearance of a few tenths of a millimeter, commonly somewhere around 0.2–0.5 mm, is a typical starting point. The right amount depends on your printer, material and settings.
- Coarse threads (larger pitch) usually print more reliably than fine ones.
- Print a short test piece before committing to a full part.
When to use a different tool
Tinkercad threads work well for jar lids, knobs, toy parts and test pieces. For threads that must match a real standard bolt precisely, or for engineering parts under load, parametric CAD tools with dedicated thread features are more dependable. See software like Tinkercad.
Drawing your own profiles: sketch and extrude
The Extrude Sketch workflow
Newer versions of Tinkercad include a sketch-based tool for drawing your own 2D outline and extruding it into 3D. Tinkercad’s Help Center describes it as Extrude Sketch. The general workflow:
- Drag the sketch or extrude tool from the shapes panel onto the workplane. This opens a 2D sketching view.
- Draw your profile with straight lines and curves. Bezier or smooth curve modes help with rounded outlines.
- Edit points and dimensions as needed, then finish the sketch.
- Back in 3D, adjust the extrusion height. Some versions also offer options such as tapering (scaling the top) and twisting.
Because this tool is relatively new, its exact options and naming may change. Check the Help Center if your screen looks different.
Scribble for freehand shapes
The Scribble shape lets you draw freehand in a pop-up canvas. Tinkercad turns your drawing into a 3D shape. It suits organic doodles, simple logos and quick custom outlines, though it’s less precise than a sketch with dimensions.
Saving your own custom shapes
If you build something you’ll reuse, such as a mounting bracket, a fillet cutter or a logo, save it as a custom shape:
- Select the shape or group.
- Look for the option to create a shape. In many versions it’s under Your Creations in the shapes panel.
- Name it. It then appears in your shapes panel in other designs.
Tinkercad once let users write their own shape generators in JavaScript. That feature has been retired, so saving a grouped design as a custom shape is now the main way to build a personal library. For code-driven designs, try Tinkercad Codeblocks.
Can you sculpt or erase in Tinkercad?
Sculpting: no. Tinkercad builds with primitive shapes, generators and extrusions. It has no clay-style sculpting brushes. For organic forms, a sculpting tool such as Blender’s Sculpt Mode is the usual next step.
Erasing: there’s no eraser tool either, but a Hole does the same job. Place a hole shape over the material you want to remove and group it. See grouping objects and using holes in Tinkercad.