Tinkercad has no “shell” or “hollow” button, but you can hollow almost any shape with one technique: make a slightly smaller copy, turn it into a hole, and group it with the original. Here’s how to do it accurately, plus variations for different shapes.
The basic method: duplicate, shrink, hole, group
- Select your shape and press Ctrl + D to duplicate it.
- Shrink the duplicate by twice your wall thickness in each direction you want walls. For example, for 2 mm walls on a 40 × 30 × 20 mm box, make the duplicate 36 × 26 mm.
- Set the duplicate to Hole (press H, or choose Hole in the inspector).
- Center it inside the original: select both, press L for Align, and click the center dots on the horizontal axes. Click the original first to make it the reference so it doesn’t move.
- Adjust its height depending on whether you want an open top or a closed shell (see below).
- Select both and Group (Ctrl + G).
Getting the wall thickness right
Type exact dimensions instead of dragging. The rule:
inner size = outer size − (2 × wall thickness)
| Outer size | Wall | Inner (hole) size |
|---|---|---|
| 40 mm | 2 mm | 36 mm |
| 50 mm | 1.6 mm | 46.8 mm |
| 25 mm | 1.2 mm | 22.6 mm |
For FDM printing with a 0.4 mm nozzle, walls that are multiples of the line width (for example 0.8, 1.2, 1.6 mm) often print cleanly. Around 1.2–2 mm is a sensible starting range for small objects; see minimum wall thickness for 3D printable models. Thinner walls save material but are weaker. For checking sizes, see how to measure a dimension in Tinkercad.
Open-top hollows (cups, boxes, planters)
For a container with a floor and an open top:
- Make the hole the same height as the outer shape, or taller.
- Raise the hole by your floor thickness (for a 2 mm floor, lift it 2 mm). Use the black cone above the shape, or type an elevation value with the Ruler.
- Make sure the hole extends above the top of the outer shape so it cuts cleanly through.
- Group.
For a box with a matching lid, see how to make a box with a lid in Tinkercad.
Fully enclosed hollows
For a sealed hollow shell:
- Shrink the hole in all three dimensions, including height, by twice the wall thickness.
- Raise it by one wall thickness so the floor and ceiling are equal.
- Center it horizontally and group.
You won’t see the hollow from outside. To check it, cut the model temporarily with a hole box, or look at the layer preview in your slicer.
Printing notes:
- FDM printers can print enclosed hollows, but the ceiling has to bridge or be supported internally. Domed or pointed tops print more easily than wide flat ceilings.
- Resin printers generally need drain and vent holes in hollow parts so uncured resin can escape. Add small cylinder holes through the wall.
Hollowing spheres and cylinders
The method works the same for rounded shapes:
- Sphere: duplicate, shrink all three dimensions by twice the wall thickness (hold Shift for proportional scaling), set to hole, align centers in all three axes, group. For a hollow hemisphere or bowl, cut the top half off with a box hole afterward.
- Cylinder or tube: duplicate, shrink the diameter, set to hole, center, and group. For a simple pipe, the Tube shape in Basic Shapes already has an adjustable wall.
Keep the same number of sides on both cylinders so the wall stays even all the way around.
Hollowing complex or imported shapes
The shrink method assumes a shape scales evenly. On complex shapes, such as a character, an imported STL or text, a scaled-down copy won’t sit at an even distance from the outside. Walls end up thick in some places and thin or broken in others.
Options:
- Hollow each simple part before grouping them together.
- Use slicer infill instead (see below).
- Use a mesh tool with a hollow function for imported models. Some slicers and mesh-editing programs, especially resin slicers, have dedicated hollowing tools that keep the wall thickness even.
Do you need to hollow at all? (slicer infill)
For FDM printing, your slicer already prints solid models with a hollow, lattice-like interior called infill, plus solid outer walls. You choose the density, for example 15%. So hollowing in Tinkercad is mainly needed when:
- The object needs a usable inside: a cup, box, planter, lamp shade or enclosure
- You want a specific wall thickness for function or appearance
- You’re resin printing and want to save resin
Otherwise, leaving the model solid and letting the slicer handle infill is usually simpler.
Troubleshooting
The hole didn’t cut anything. Make sure both shapes were selected when you grouped. See grouping objects and using holes in Tinkercad.
One wall is thicker than the others. The hole isn’t centered. Ungroup, re-align with the original as reference, and regroup.
A thin skin covers the top opening. The hole is the same height as the outer shape and its top lines up exactly. Make the hole a little taller.
Uneven walls on a rounded box. If the outer box has a corner radius, give the hole a smaller radius (outer radius minus wall thickness) so the walls stay even around the corners.