Tinkercad

Tinkercad Projects: Characters, Buildings and Articulated Prints

Three Tinkercad projects step by step: a simple character, a house with doors, windows and a roof, and an articulated print-in-place model.

On this page
  1. Before you start: planning a project
  2. Project 1: a simple character
  3. Project 2: a house or building
  4. Project 3: an articulated (print-in-place) model
  5. More project ideas

Once you know the basics, the fastest way to improve in Tinkercad is to build real projects. Here are three that teach different skills: a character (symmetry and detail), a building (holes and structure), and an articulated print (moving parts and clearance). If you haven’t used Tinkercad before, start with our beginner’s Tinkercad tutorial.

Tinkercad has three main workspaces for creating designs: 3D Design, Circuits and Codeblocks. All of these projects use 3D Design.

Before you start: planning a project

  • Sketch it first. A rough drawing with a few key dimensions saves a lot of trial and error.
  • Decide on the final size. A 30 mm figurine and a 150 mm model need different levels of detail.
  • Build in parts. Keep separate pieces ungrouped (or in small groups) until you’re happy, so you can adjust them.
  • Think about printing early. Large overhangs, thin parts and floating pieces are easier to avoid than to fix later.

Project 1: a simple character

Build the body from primitives

Start with the biggest shapes and work toward details:

  1. Head: a sphere or a box with a large Radius setting for a rounded blocky look.
  2. Torso: a box, cylinder or squashed sphere below the head. Overlap it slightly with the head.
  3. Legs: two cylinders or boxes. A paraboloid or a rounded box makes a good foot.
  4. Arms: cylinders or capsule shapes, angled out from the shoulders. Small spheres at the joints make the shapes blend.

Use mirror for symmetry

Build one arm and one leg, then:

  1. Select the limb and press Ctrl + D to duplicate it.
  2. Press M and click the left-right mirror arrow.
  3. Move the copy into position on the other side. The Align tool helps keep it level.

See how to mirror and flip objects in Tinkercad for more.

Details, color and grouping

  • Add eyes, a nose and buttons as small spheres or cylinders. Cut a mouth with a hole.
  • Add a hat, hair or accessories from cones, tori and boxes.
  • Color each part in the inspector. To keep the colors when you group, use the group’s Multicolor option. See grouping objects and using holes in Tinkercad.
  • Before big changes, duplicate the whole character and move the copy aside as a backup.

Printing small figures

  • Very thin arms and pointed features may break or fail to print. Thicken them a little or tuck them against the body.
  • Give the character a flat base or flat-bottomed feet so it sits on the build plate.
  • Arms that stick straight out will need supports. Angling them downward helps; see designing 3D prints without supports.

If you want to animate a character, you can export it as OBJ and bring it into other software for rigging. Tinkercad itself doesn’t animate.

Project 2: a house or building

Walls and floor

  1. Drag a Box onto the workplane and size it to the house footprint and wall height, for example 60 × 40 × 35 mm.
  2. Duplicate it (Ctrl + D). Make the copy smaller by twice your wall thickness on length and width (for 2 mm walls, 56 × 36 mm).
  3. Set the copy to Hole, raise it by the floor thickness (2 mm), and make it taller than the walls so it opens the top.
  4. Select both, center them with the Align tool (L), and Group.

This is the same technique explained in how to hollow out an object in Tinkercad.

Doors and windows

  1. Drag in boxes for each door and window and set them to Hole.
  2. Make them deeper than the wall so they cut all the way through.
  3. Place them using the arrow keys for precise spacing. Duplicating one window and nudging it keeps spacing consistent; see how to align, distribute and scale objects in Tinkercad.
  4. Group them with the walls.

For window frames, add thin solid boxes around each opening after cutting.

The roof

  1. Drag a Roof shape onto the workplane.
  2. Size it to match the house footprint, plus a little extra for overhang.
  3. Lift it onto the walls. The black cone above the shape raises it, or select it and press D after positioning it above the walls to drop it onto them.
  4. Rotate it 90° if the ridge is running the wrong way.

For printing, a steep roof is easier than a flat, wide overhang. You can also print the roof separately so you can look inside.

Multi-story and detail ideas

  • Stack floors as separate hollow boxes with thin floor plates between them.
  • Use the Workplane tool to build on any surface to add balconies, signs and chimneys to walls.
  • Add steps from a series of boxes, each duplicated and nudged up and forward with Ctrl + D.

Project 3: an articulated (print-in-place) model

Articulated prints, like flexible snakes, dragons and fidget toys, come off the printer already assembled, with joints that move. Tinkercad can make simple versions.

How print-in-place joints work

Each joint is two interlocking parts with a small gap between them. The gap keeps them from fusing during printing, while the interlocking shape keeps them from falling apart.

  1. Place a Torus and thin its tube so there’s room for a second ring to pass through.
  2. Flatten the bottom slightly with a hole box so it sits on the build plate.
  3. Duplicate it, rotate the copy (for example 90°), and position it so it passes through the first ring without touching it.
  4. Repeat down the length of the model, then attach body segments to each link.

Pin-and-socket hinge

  1. Split the part where you want the joint with a thin hole box.
  2. Add a cylinder pin attached to one side only.
  3. Duplicate the pin, enlarge it slightly to create clearance, set it to Hole, and use it to carve a socket in the other side.
  4. Make sure the socket shape traps the pin, for example with a wider head or a ring around it, so the parts can’t slide apart.

Clearance and slicer settings

  • The gap between moving parts is critical. Many print-in-place designs use something in the range of 0.3–0.5 mm, and some use more for reliability. The right value depends on your printer, nozzle and material, so print a small test joint first. See 3D printing tolerances.
  • Avoid supports inside joints, because they can fuse the parts together. Design joints that print without supports.
  • After printing, flex each joint gently to break it free.

More project ideas

The complete guide to tinkercad

Tinkercad Tutorial: How to Design in 3D with Tinkercad
Read the guide

Keep exploring

Guides from other topics

All topics →