UV unwrapping is the step between modeling and texturing that many beginners dread. In Blender the process itself is short: mark seams, press U, unwrap. The skill is in choosing where the seams go and checking the result. This guide covers both.
What UV unwrapping is
A 3D model’s surface has to be laid flat before a 2D image texture can be applied to it. UV unwrapping does that flattening. The result is a UV map: a 2D layout of your mesh’s faces, where U and V are the horizontal and vertical axes (named that way to avoid confusion with X, Y and Z).
Think of peeling an orange or unfolding a cardboard box. To flatten a closed shape you have to cut it somewhere. Those cuts are seams. Each separate flattened piece is a UV island.
A good UV map has:
- Little stretching, so textures aren’t distorted
- Seams in hidden or natural places, so any visible join is easy to disguise
- Consistent scale between islands, so texture detail looks even
- No overlaps (unless deliberate), especially if you’ll bake textures
- Efficient use of space, so texture resolution isn’t wasted
Before you unwrap
- Apply scale. In Object Mode, press
Ctrl+A→ Scale. Unwrapping uses the mesh’s real proportions, and unapplied scale can produce stretched or skewed islands. - Finish the modeling, or at least the major shapes. Big topology changes after unwrapping will scramble the UVs in those areas.
- Clean the mesh. Merge duplicate vertices (
M→ By Distance) and fix flipped normals (Shift+N). Problems in the mesh become problems in the UVs.
How to UV unwrap in Blender, step by step
1. Open the UV Editing workspace
Click the UV Editing tab at the top of the window. It shows the UV Editor on the left and the 3D Viewport, already in Edit Mode, on the right. The UV Editor only shows UVs for selected faces, unless you turn on UV Sync Selection in its header.
2. Mark seams
Switch to edge select mode (2). Select the edges where the mesh should be cut. Alt + click selects a whole edge loop, which is often exactly what you want. Then press Ctrl + E → Mark Seam, or right-click → Mark Seam. Seams show as red lines in the viewport. To remove one, select it and choose Clear Seam.
3. Unwrap
Select all faces (A), press U, and choose Unwrap. Blender flattens the mesh along your seams and arranges the islands in the UV space.
The Adjust Last Operation panel (bottom-left, or F9) lets you change the method. Angle Based is the default and a good general choice, and Conformal is the alternative. Recent versions also offer Minimum Stretch. You can also change the Margin between islands there.
Tip: In the UV Editor, turn on Live Unwrap. Blender then re-unwraps automatically each time you mark or clear a seam, so you can see the effect immediately.
4. Check for stretching with a checker texture
Don’t judge UVs by eye in the UV Editor alone; look at them on the model:
- In the UV Editor, click New to create an image and set Generated Type to UV Grid or Color Grid.
- Apply it to the model. The quickest way is in the Shading workspace: add an Image Texture node, choose the grid image, and connect it to the material’s Base Color.
- Look at the model in Material Preview mode.
You want squares that look square and are roughly the same size everywhere. Stretched rectangles mean distortion. Squares that are much larger or smaller than elsewhere mean inconsistent scale.
The UV Editor can also show distortion directly. Enable Display Stretch in its overlays: blue means little distortion, and warmer colors mean more.
5. Arrange and pack the islands
- Average Islands Scale (
Ctrl+Ain the UV Editor) makes islands proportional to their real size on the model, so texture detail is consistent. - Pack Islands (
Ctrl+Pin the UV Editor) arranges islands to fill the UV square efficiently. Set a Margin so islands aren’t touching. Textures need a little padding to avoid bleeding across edges, especially at lower resolutions or when mipmapped in a game engine. - Rotate islands so straight edges run horizontally or vertically where possible. That makes textures with a direction, such as wood grain, fabric or text, much easier to line up.
- You can give important areas, like a character’s face or a label, a bit more space than hidden ones.
Where to put seams
Rules of thumb:
- Hide seams where the viewer won’t look: the underside, the back, inside creases, behind other parts.
- Follow natural boundaries: where materials change, along hard edges, along panel lines or clothing seams.
- Use as few seams as you can, but enough that the island lays flat without heavy stretching. More seams mean less distortion but more visible joins. You’re balancing the two.
- Hard edges are good seam candidates on hard-surface models. A sharp corner breaks the texture visually anyway.
Common shapes:
- Cylinder (pipe, bottle): one straight seam down the side, hidden at the back, plus loops around the top and bottom caps.
- Box: cut it like an unfolded cardboard box. Seams along some edges leave the faces connected in a cross shape, or cut every edge if you’re happy with six separate islands.
- Sphere or head: a seam from the top down the back. For characters, seams usually run behind the ears and along the back of the head.
- Limbs: a seam along the inside of arms and legs, where it’s least visible.
- Ring or torus: one loop around the tube and one around the ring.
Other unwrap methods and when to use them
All of these are in the U menu in Edit Mode.
| Method | What it does | Good for |
|---|---|---|
| Unwrap | Flattens along your marked seams | Most models where seam placement matters |
| Smart UV Project | Automatically splits the mesh by angle and unwraps it, no seams needed | Hard-surface props, baking lightmaps or normal maps, quick results |
| Lightmap Pack | Gives every face its own space with no overlaps | Lightmap baking |
| Follow Active Quads | Lays out a grid of quads to match a selected, already-straightened quad | Long strips such as roads, belts, trims, ribbons |
| Cube / Cylinder / Sphere Projection | Projects UVs from a simple shape | Objects close to those shapes |
| Project from View | Projects UVs from the current viewpoint | Flat surfaces such as signs, screens, decals, or a front-facing label |
| Reset | Maps each face to the full UV square | Starting over, or trim-sheet workflows |
Smart UV Project is tempting for everything, but it produces many small islands with seams wherever the angle changes. That’s fine for baking and for textures generated in other software, but awkward if you plan to hand-paint.
Useful UV Editor tools
- Select an island: hover and press
L. - Move, rotate, scale:
G,RandS, the same as in the viewport. - Pin: select vertices and press
Pto pin them. Pinned vertices stay put when you unwrap again, which is useful for straightening edges.Alt+Punpins. - Straighten and align: the UV menu has tools to align selected vertices and straighten edges.
- Seams from Islands: this creates seams from an existing UV layout, which helps when you’ve imported a model.
- Stitch: joins islands along shared edges.
Fixing common UV problems
| Problem | Likely cause and fix |
|---|---|
| Texture is stretched on one area | Not enough seams there; add a seam and unwrap again, or pin and relax |
| Whole island is skewed or squashed | Unapplied object scale; apply scale and unwrap again |
| Texture appears mirrored or backwards | An island is flipped; select it and mirror it in the UV Editor (Ctrl + M, then an axis) |
| Islands overlap and baking looks wrong | Unwrap again or pack islands; mirrored halves from a Mirror modifier will overlap (see below) |
| Visible line along a seam | Add more margin; or move the seam somewhere less visible |
| Detail looks blurry in some places | That island is too small; average island scale or give it more space |
| Unwrap produces a mess | Check for duplicate vertices, interior faces or non-manifold geometry |
UVs and modifiers
- Mirror modifier: both halves share the same UV space by default. That saves texture space and is fine for many painted textures, but the overlap causes problems for baking. The Mirror modifier’s UV options can offset the mirrored half; see our guide to the Mirror modifier.
- Subdivision Surface modifier: smooths UVs along with the geometry. Its UV Smooth option controls how UV boundaries behave. Unwrap the low-resolution cage, and check the result with the modifier enabled. See the Subdivision Surface modifier and support loops.
- Boolean modifier: new faces created by a boolean can end up with poor UVs. Unwrap after applying it.
UVs are also a required step for baking a high poly sculpt onto a game-ready mesh, covered in High poly to low poly: retopology and game-ready modeling.