Blender

Blender Modeling Shortcuts Every Beginner Should Know

The Blender modeling shortcuts beginners use most: navigation, selection, G/R/S with precision, extrude, loop cut, bevel, pie menus and what Ctrl+B does.

On this page
  1. How Blender shortcuts work (read this first)
  2. Viewport navigation
  3. Object Mode essentials
  4. Selecting in Edit Mode
  5. Moving, rotating and scaling with precision
  6. The core modeling tools
  7. Menus and pie menus that save time
  8. Workflow lifesavers
  9. What is Ctrl+B in Blender?
  10. Which shortcuts to learn first

Blender is built around the keyboard. Nearly every modeling tool has a menu entry, but the artists who model quickly mostly use shortcuts. You don’t need hundreds of them. A few dozen cover most day-to-day modeling, and they’re listed below with the most important ones first.

These are for Blender’s default keymap in recent versions (2.80 and later). If you’ve switched to the Industry Compatible keymap, many of these will differ.

How Blender shortcuts work (read this first)

A few rules explain most of the “my shortcut didn’t work” moments:

  • Where your mouse is matters. Shortcuts go to whichever editor is under the cursor. Pressing G with the mouse over the Outliner does nothing useful. Hover over the 3D Viewport first.
  • Mode matters. Many keys do different things in Object Mode and Edit Mode. Tab switches between the two.
  • No numpad? Turn on Emulate Numpad in Preferences → Input, and the number row will act as the numpad for views. Note that this replaces the number row’s normal Edit Mode use (switching between vertex, edge and face select), so use the header buttons for that instead.
  • Forgotten a shortcut? Press F3 to search for any operator by name. The search results usually show the shortcut too.

Viewport navigation

Action Shortcut
Orbit Middle mouse drag
Pan Shift + middle mouse drag
Zoom Scroll wheel (or Ctrl + middle mouse drag)
Front / right / top view Numpad 1 / Numpad 3 / Numpad 7
Opposite view (back, left, bottom) Ctrl + Numpad 1 / 3 / 7
Toggle perspective / orthographic Numpad 5
Camera view Numpad 0
Frame the selection Numpad . (period)
Frame everything Home
View pie menu ` (backquote/tilde key)
Local view (isolate selection) Numpad /
Maximize the editor under the mouse Ctrl + Space

Orthographic front, side and top views matter more than they first seem. They’re how you line a model up with reference images; see our guide to blueprints and reference images.

Object Mode essentials

Action Shortcut
Switch Object / Edit Mode Tab
Add menu (mesh, curve, light, camera…) Shift + A
Delete X or Delete
Duplicate Shift + D
Linked duplicate (shares mesh data) Alt + D
Join selected objects Ctrl + J
Apply transforms (scale, rotation…) Ctrl + A
Clear location / rotation / scale Alt + G / Alt + R / Alt + S
Add Subdivision Surface at level 1–5 Ctrl + 1 to Ctrl + 5
Snap menu (cursor to selected, etc.) Shift + S

Ctrl + A → Scale deserves a special mention. Unapplied scale is behind many beginner problems: bevels that come out uneven, modifiers that behave strangely, UV unwraps that stretch. If an object was scaled in Object Mode, apply the scale before you do detailed modeling on it.

Selecting in Edit Mode

Action Shortcut
Vertex / edge / face select mode 1 / 2 / 3 (number row)
Select all A
Deselect all Alt + A (or double-tap A)
Invert selection Ctrl + I
Box select B
Circle select (scroll to resize) C
Add to or remove from selection Shift + click
Select an edge loop Alt + click on an edge
Select an edge ring Ctrl + Alt + click
Select shortest path to the clicked element Ctrl + click
Select connected geometry under the mouse L
Select all connected to the current selection Ctrl + L
Grow / shrink selection Ctrl + Numpad + / Ctrl + Numpad -
Toggle X-ray (select through the mesh) Alt + Z

X-ray is worth remembering. With it off, box select only picks the elements you can see. With it on, box select grabs everything inside the box, including the back of the model.

Moving, rotating and scaling with precision

G (grab/move), R (rotate) and S (scale) work in both modes. What makes them powerful is what you press after them:

  • Lock to an axis: press X, Y or Z. Press the same key a second time to use the object’s local axis instead of the global one.
  • Exclude an axis: Shift + Z moves or scales on X and Y only. This is handy for sliding something along the floor.
  • Type a value: after G X, type 2 and press Enter to move exactly 2 units. R Z 90 rotates 90 degrees around Z.
  • Snap while dragging: hold Ctrl.
  • Finer control: hold Shift for slower, more precise movement.
  • Cancel: right-click or Esc puts everything back.

Edit Mode adds a few more:

  • G G (press twice): slide a vertex or edge along the existing geometry, so it moves without changing the shape of the surface.
  • Alt + S: shrink/fatten, which moves selected elements along their normals.

The core modeling tools

These are the Edit Mode tools you’ll use constantly.

Tool Shortcut What it does
Extrude E Pulls new geometry out from the selection
Inset I Makes a smaller face inside the selected faces (press I twice for individual faces)
Loop cut Ctrl + R Adds an edge loop; scroll to add more cuts, click, then slide into place
Bevel edges Ctrl + B Rounds or chamfers edges; scroll to add segments
Bevel vertices Ctrl + Shift + B Bevels a corner point
Knife K Draws new cuts across faces; Enter to confirm
Fill / make face or edge F Creates a face or edge from the selected elements
Connect vertex path J Splits faces by joining the selected vertices
Merge M Merge menu (at center, at last selected, by distance…)
Separate P Moves the selection into a new object
Rip V Tears vertices or edges apart
Dissolve Ctrl + X Removes elements without leaving a hole
Hide / unhide H / Alt + H Hide the selection, or reveal everything
Hide unselected Shift + H Focus on just what you’ve selected

Two habits help here. Use Merge → By Distance (M) to clean up duplicate vertices after imports or booleans. And when a cut goes wrong, it’s usually quicker to undo and redo it than to fix it.

When you can’t remember a specific key, these menus group related tools:

Menu Shortcut
Vertex menu Ctrl + V
Edge menu (mark seam, mark sharp, crease…) Ctrl + E
Face menu (shade smooth/flat, triangulate…) Ctrl + F
Context menu Right-click
Shading pie (wireframe, solid, material, rendered) Z
Pivot point pie . (period)
Transform orientation pie , (comma)
Toggle snapping Shift + Tab
Normals menu Alt + N
Recalculate normals outside Shift + N

The Edge menu is where you mark UV seams, which is covered in our UV unwrapping guide.

Workflow lifesavers

Action Shortcut
Undo / redo Ctrl + Z / Ctrl + Shift + Z
Adjust the last operation F9
Repeat the last operation Shift + R
Search for any operator F3
Toggle the sidebar (exact dimensions, view settings) N
Toggle the toolbar T
Save Ctrl + S
Render image F12

F9 is the one most beginners miss. After an extrude, bevel or loop cut, it reopens the operator’s settings so you can type an exact amount, add segments or change options without redoing the step. The same panel also appears in the bottom-left corner of the viewport until you do something else.

What is Ctrl+B in Blender?

It depends on the mode:

  • In Edit Mode, Ctrl + B is Bevel. Select edges, press Ctrl + B, move the mouse to set the width, and scroll to add segments for a rounder result. Ctrl + Shift + B bevels vertices instead.
  • In Object Mode (and in camera view), Ctrl + B draws a render region, a box that limits rendering to part of the image. It’s one of the easiest ways to render faster in Blender while testing settings. Ctrl + Alt + B clears it.

If an object’s bevel comes out lopsided, check whether its scale has been applied (Ctrl + A → Scale in Object Mode). Bevel width follows the object’s scale, so unapplied scale is the most common cause.

Which shortcuts to learn first

Trying to memorize everything at once rarely works. Learning them in layers sticks better:

  1. Day one: navigation, Tab, Shift + A, G/R/S with axis keys, X, Ctrl + Z.
  2. First models: 1/2/3, A, Alt + click, E, I, Ctrl + R, Ctrl + B.
  3. Cleaner work: F9, Ctrl + A, M, K, F, H/Alt + H, Alt + Z, Numpad ..
  4. Faster work: pie menus, Shift + R, Ctrl + 1–5, Shift + D, local view.

Shortcuts are only half the skill. The other half is knowing what to model and in what order. Our guide on how to model properly in Blender covers that workflow. Two modifiers that work hand in hand with these keys are the Mirror modifier and the Subdivision Surface modifier.

The complete guide to blender

Blender for 3D Modeling: Is It CAD and What Can It Do?
Read the guide

Keep exploring

Guides from other topics

All topics →