Booleans are one of the fastest ways to model in Blender. You can drill a hole, cut a slot or fuse two shapes in seconds. They’re also one of the fastest ways to end up with a mesh full of strange shading, thin slivers and n-gons. This guide covers how to set up the Boolean modifier, then how to keep the results clean.
What the Boolean modifier does
The Boolean modifier combines two meshes using one of three operations:
- Difference subtracts the cutter object from the main object. Use it for holes, slots, grooves and recesses. It’s the same idea as grouping a hole shape in Tinkercad.
- Union merges both objects into one continuous shell, removing the faces that end up inside.
- Intersect keeps only the volume where the two objects overlap.
As a modifier, it’s non-destructive. Move, rotate or scale the cutter object and the result updates live, until you choose to apply it.
How to set up a Boolean modifier
- Create both objects. For example, a cube as the main object and a cylinder as the cutter. Position the cutter where you want the cut.
- Select the main object (the one you want to change).
- Add the modifier. In the Modifier Properties tab (the blue wrench), click Add Modifier → Generate → Boolean.
- Pick the cutter. Leave the operand type as Object and choose the cutter with the dropdown or eyedropper. Choose Collection instead to cut with every object in a collection at once.
- Choose the operation: Difference, Union or Intersect.
- Hide the cutter. Select it and, in Object Properties → Viewport Display, set Display As to Wire (or Bounds). You’ll still see its outline for positioning, but not the solid object. You can also disable it for rendering in the Outliner so it never appears in final images.
- Keep it live or apply it. Leave the modifier in place while you’re still adjusting. When you’re done, open the modifier’s dropdown menu and choose Apply (or press
Ctrl+Awith the mouse over the modifier).
Choosing a solver
Which solvers you see depends on your Blender version:
- Exact is slower but the most robust. It handles overlapping and coplanar geometry well. Its options include Self Intersection, for operands that intersect themselves, and Hole Tolerant, for meshes that aren’t perfectly closed.
- Fast (the older name; recent versions call it Float) is quicker but less reliable when faces overlap or touch.
- Manifold (Blender 4.5 and later) is designed to be very fast, but it expects both meshes to be clean, closed (manifold) volumes.
If a result looks wrong, try switching solvers. That alone often fixes it. For complex shapes, Exact is usually the safest choice; for clean, closed meshes in heavy scenes, Manifold can be much quicker.
Why booleans wreck meshes
A boolean has to calculate where two surfaces cross and then rebuild faces along that line. It does this without any regard for nice topology. The usual problems:
- N-gons and long, thin triangles. New edges run from the cut to existing vertices wherever the algorithm finds convenient, often producing large many-sided faces or slivers that stretch across the surface.
- Shading artifacts. On curved or smooth-shaded surfaces, those stretched faces make the shading smear, dent or streak around the cut.
- Mismatched density. A 64-segment cutter on a cube with eight vertices produces a ring of tiny faces connected by huge ones.
- Coplanar faces. If the cutter’s face lies exactly on the main object’s face, the solver may not know which side to keep. The result is flickering, missing faces or holes.
- Bad input. Non-manifold meshes (holes, loose edges), flipped normals, duplicate vertices or unapplied negative scale on either object can produce unpredictable results.
How to keep booleans clean
Prepare both meshes
- Make sure both objects are closed volumes. A boolean with a single plane as a cutter is asking for trouble.
- Recalculate normals (
Shift+Nin Edit Mode) so they point outward. The Face Orientation overlay shows inward faces in red. - Merge duplicate vertices (
M→ By Distance). - Apply scale (
Ctrl+A→ Scale), especially if either object has negative scale from mirroring.
Avoid coplanar faces
Make the cutter slightly larger than it needs to be, so it passes clearly through the surface. When cutting a hole through a 2 cm-thick plate, for example, make the cutter longer than 2 cm and center it. Never let the cutter’s cap sit exactly flush with the surface. The Exact solver is more forgiving here, but avoiding the situation is still the best fix.
Match the density
Keep the cutter’s resolution similar to the surface it’s cutting. If you need a round hole on a low-detail surface, add supporting geometry to the main object first. Loop cuts or an inset around the cut area give the new edges something to connect to. Conversely, don’t use a 128-segment cylinder for a small hole that only needs 16.
Manage your cutters
- Put all cutters in a dedicated collection (for example “Cutters”) and hide it from rendering.
- Name each cutter after what it does (“Cutter_ScrewHole_L”).
- Parent cutters to the main object (
Ctrl+P) so they move with it. - Using a Collection operand lets you add new cuts just by dropping objects into the collection.
Fixing shading artifacts
If a cut surface looks smudged or dented after a boolean:
- Use flat surfaces where you can. Booleans on flat faces shade far better than booleans on curved ones.
- Add the Weighted Normal modifier below the Boolean (and any Bevel). It biases shading toward large faces, which often cleans up hard-surface boolean shading dramatically. Combine it with smooth shading.
- Use Shade Auto Smooth / Smooth by Angle so sharp edges stay sharp while curved areas are smooth.
- Add a small Bevel after the Boolean. A bevel on the cut edge, usually limited by angle, catches light and helps shading transition. Recent versions also offer a Harden Normals option in the Bevel modifier.
- Add supporting geometry around the cut so the new faces aren’t stretched across the whole surface.
Booleans with Bevel and Subdivision Surface
With Bevel: put the Bevel modifier below the Boolean in the stack, so it bevels the edges the boolean creates. Set its limit method to Angle so it only bevels sharp edges. Add a Weighted Normal modifier at the bottom.
With Subdivision Surface: this is where booleans cause the most trouble. Subdivision smooths every face, and the n-gons and triangles left by a boolean pinch and wobble badly when smoothed. Your options:
- Apply the boolean, then fix the topology by hand into clean quads with support loops before subdividing. That’s the most work, but gives the best results. See our guide to the Subdivision Surface modifier and support loops.
- Skip subdivision and use the Bevel and Weighted Normal approach above. This is common in modern hard-surface work.
- Subdivide first, then cut, so the boolean operates on already-dense geometry. The polygon count gets high, but that’s acceptable for renders.
Cleaning up after you apply
Once you’ve applied a boolean and need tidy geometry (for further modeling, UV unwrapping or export):
- Merge by Distance (
M→ By Distance) to weld any duplicate vertices along the cut. - Limited Dissolve (in the Delete menu,
X) to remove unnecessary edges on flat areas. - Connect vertices with
J, or use the knife (K), to split n-gons into quads or well-shaped triangles where needed. - Triangulate (
Ctrl+T) if the target is a game engine or a 3D printer and you just want predictable faces. - Check for non-manifold geometry with Select → Select All by Trait → Non Manifold, especially before 3D printing.
Unwrap UVs after this cleanup, not before; see how to UV unwrap a model in Blender.
Other ways to do booleans in Blender
- Edit Mode Intersect (Boolean). In Edit Mode, select the geometry you want to keep, plus (as the active part) the geometry that cuts it, and use Face → Intersect (Boolean). That’s handy for one-off cuts inside a single object. Intersect (Knife) cuts lines into the surface without removing anything.
- Bool Tool. An add-on (available as an extension in Blender 4.2 and later) that adds quick boolean shortcuts in Object Mode, such as
Ctrl+Numpad -for Difference andCtrl+Numpad +for Union. It also sets the cutter’s display for you. - Geometry Nodes. The Mesh Boolean node does the same job inside a procedural node setup.
When not to use a boolean
Booleans are a tool, not a default. Model the shape directly instead when:
- The object will be subdivided and needs perfect smooth shading
- The object will deform (characters, cloth), where clean edge loops matter
- A simple inset and extrude would give the same result with better topology
- You need controlled, game-ready topology with a tight poly budget
For symmetrical hard-surface models, combining a Mirror modifier with a few well-placed booleans keeps the work fast and editable. The wider workflow is covered in how to model properly in Blender.