Quick answer
To apply an image texture in Blender:
- Select your object.
- Open the Material Properties tab (the red sphere icon) and click New.
- Click the small circle next to Base Color and choose Image Texture.
- Click Open and pick your image file.
- Switch the viewport to Material Preview or Rendered shading to see it.
If the texture looks stretched or smeared, your model needs UV unwrapping. The rest of this guide covers that, plus tiling, full PBR texture sets, and the common problems people run into.
Before you start: UVs
A UV map tells Blender how to lay a flat 2D image onto a 3D surface. Every image texture needs some kind of mapping.
- Blender’s default primitives (cube, sphere, cylinder and so on) come with UVs already, so textures work right away, though not always with ideal layout.
- Models you’ve built or heavily edited may have missing or distorted UVs. Textures on these will look stretched or smeared until you unwrap them.
You can check by opening the UV Editing workspace, selecting all faces in Edit Mode, and looking at the layout on the left.
Method 1: Material Properties tab
This is the quickest way to put a single image on a model.
- Select the object in Object Mode.
- In the Properties editor, open the Material Properties tab.
- If the object has no material, click New. Blender creates a material using the Principled BSDF shader.
- Find Base Color and click the small circle to its left.
- Choose Image Texture from the list.
- Click Open, browse to your image (PNG, JPG and other common formats work), and confirm.
Blender creates an Image Texture node behind the scenes and connects it to the Base Color input.
Method 2: Shader Editor
The Shader Editor gives you full control and is where you’ll do most material work.
- Select your object and switch to the Shading workspace at the top of the window.
- If needed, click New in the Shader Editor header to create a material.
- Press
Shift+A, go to Texture, and choose Image Texture. Alternatively, drag the image file from your file browser straight into the Shader Editor. - Click Open on the node to load your image (if you didn’t drag it in).
- Connect the node’s yellow Color output to the Base Color input of the Principled BSDF.
Other maps follow the same pattern, but with different connections and a different color space. Set roughness, metallic, normal and height maps to Non-Color in the Image Texture node’s color space dropdown. Our guide to PBR texture maps has a table showing where each map connects.
Method 3: Node Wrangler for full PBR texture sets
If you’ve downloaded a full material (color, roughness, normal, displacement and so on), Node Wrangler can connect everything in one step.
- Enable Node Wrangler: Edit > Preferences > Add-ons, search for “Node Wrangler”, and tick the checkbox. It ships with Blender.
- In the Shader Editor, click the Principled BSDF node to select it.
- Press
Ctrl+Shift+T(Principled Texture Setup). - In the file browser, select all the texture maps for the material at once and confirm.
Node Wrangler reads the file names (such as _color, _rough, _normal, _disp), loads each image with the right color space, and wires them up, including a Normal Map node and a Mapping node for tiling. It’s worth checking the result, since unusual file names may not be recognized.
If you need materials to try this on, our guide on where to get free textures for Blender and Unity lists several CC0 libraries.
Seeing the texture in the viewport
A common moment of confusion: you’ve connected everything, but the model still looks plain gray. That’s usually because the viewport is in Solid shading mode, which doesn’t show material textures by default.
- Press
Zand choose Material Preview, or click the third sphere icon at the top right of the viewport. - Or stay in Solid mode and open the shading popover (the small arrow next to the shading icons), then set Color to Texture.
Fixing stretched or distorted textures
UV unwrap
- Select the object and press
Tabto enter Edit Mode. - Press
Ato select everything. - Press
Uto open the UV menu. - Choose Smart UV Project for a quick automatic result, or Unwrap for better control (ideally after marking seams along edges where the surface can be “cut”).
For hard-surface objects, Smart UV Project is often good enough for tiling textures. For characters or objects with a single painted texture, marking seams and unwrapping gives cleaner results. You can see and adjust the layout in the UV Editing workspace.
Box projection for quick results
For simple objects with tiling materials, such as walls, crates or rocks, you can skip unwrapping:
- Add a Texture Coordinate node and connect its Object or Generated output to the Image Texture’s Vector input.
- On the Image Texture node, change the projection from Flat to Box.
- Increase the Blend value slightly to soften the seams where the projections meet.
Box projection projects the image from six directions. It’s fast and avoids stretching on blocky shapes, though seams can show on curved surfaces.
Scaling, rotating and tiling the texture
To control how large the texture appears and how often it repeats:
- Add a Texture Coordinate node and a Mapping node.
- Connect UV (or Object) to the Mapping node’s Vector input, and the Mapping output to the Image Texture’s Vector input.
- Change the Mapping node’s Scale values. Higher values make the texture repeat more and appear smaller.
- Use Rotation and Location to rotate and shift it.
With Node Wrangler enabled, select the Image Texture node and press Ctrl+T to add both nodes automatically.
The Image Texture node’s Extension setting controls what happens beyond the image edges: Repeat tiles it (the default), Extend stretches the edge pixels, Clip shows nothing, and Mirror flips alternating tiles.
Applying a texture to only part of a model
To put an image on one area, like a label on a bottle:
- Select the object and open Material Properties.
- Click the + button next to the material list to add a second material slot, then click New to create a new material in it.
- Set up the image texture in that new material.
- Enter Edit Mode, select the faces that should use it, and click Assign in the material panel.
Each face can use one material, so you can mix several textured materials on one object this way. UV unwrap the selected faces so the image fits where you want it.
Images with transparency
For PNGs with transparent areas, such as decals, leaves or labels:
- Connect the Image Texture’s Alpha output to the Principled BSDF’s Alpha input.
- In EEVEE, check the material’s settings so transparency is rendered the way you want. The exact options have changed between Blender versions, so look in the material’s Settings panel for blend or render method options.
- Cycles handles alpha without extra settings.
Keeping textures from going missing (packing)
Blender stores links to image files, not the images themselves, by default. If you move the .blend file or the textures, Blender can’t find them and shows the surface in bright pink (magenta).
- To relink, use the folder icon on each Image Texture node to point to the image again, or use File > External Data > Find Missing Files to search a folder.
- To avoid the problem, pack the images into the
.blendfile through the options under File > External Data. This makes the file larger but self-contained, which helps when sharing projects. - Alternatively, keep textures in a folder next to your
.blendfile and use relative paths (Blender’s default), then move the whole folder together.
Troubleshooting
- Model is still gray: switch to Material Preview or Rendered view, or set Solid mode’s color to Texture.
- Texture is stretched or smeared: UV unwrap the model or use box projection.
- Texture is too big or too small: adjust the Mapping node’s Scale.
- Surface is bright pink: the image file is missing. Relink or pack it.
- Material looks too shiny or flat: roughness or normal maps may be set to sRGB instead of Non-Color.
- Bumps look inverted: the normal map may be the DirectX version. Our comparison of normal maps, bump maps and displacement maps explains how to fix it.
- Render looks different from Material Preview: Material Preview uses a built-in HDRI that isn’t rendered. Set up world lighting, such as one of the free HDRIs for Blender we recommend.